概述:Descriptions
粉体物料与粘合剂在圆筒形容器中由底部混合奖充分混合成湿润软材,然后由侧置的高速粉碎奖切割成均匀的湿颗粒。
The powder raw material and adhesive in a cvlinder are mixed fully at the bottom to turn into ahumid soft material. Then it is cru-hed at a high speed and become uniform granules.
特 点 Features
本机采用卧式圆筒构造,结构合理。
充气密封驱动轴,清洗时可切换成水。
流态化造粒,成粒近似球形,流动性好
较传统***减少25%粘合剂,干燥时间缩短。
每批次干混2分钟,造粒1-4分钟,工效比传统***提高4 5倍。
在同***封闭容器内完成,干混-湿混-制粒,***缩减,符合GMP规格。
整个操作具有严格的安全保护措施。